
Stay in the loop with everything we have going on at Tite-Reach by joining our mailing list.
Stay in the loop with everything we have going on at Tite-Reach by joining our mailing list.
Seen on TV shows like TruckU, Detroit Muscle, and more.
Welcome to our online store! Here you can buy the Tite-Reach Extension Wrench safely and securely using PayPal.
You don't need a PayPal account to purchase! Just click "Add to Cart" below to get started.
Comes standard with three 3/8" x 3/8" adapters, one 3/8" x 1/2" adapter, one 1/4" x 1/4" adapter, and one 1/4" bit adapter.
$215.00 + FREE US SHIPPING
Comes standard with two 3/8" x 3/8" adapters, one 3/8" x 1/2" adapter, one 1/4" x 1/4" adapter, and one 1/4" bit adapter.
$200.00 + FREE US SHIPPING
Comes standard with two 3/8" x 3/8" adapters, one 3/8" x 1/2" adapter, one 1/4" x 1/4" adapter, and one 1/4" bit adapter.
$120.00 + FREE US SHIPPING
Comes standard with one 3/8" x 3/8" adapter, one 3/8" x 1/2" adapter, one 1/4" x 1/4" adapter, and one 1/4" bit adapter
$105.00 + FREE US SHIPPING
Our BIGGEST addition yet! The 1/2" PRO gives users an extra 14" of reach, and comes milled with a 1/2" connector on one side. Impact Rated up to 1,200 ft/lbs.
$120.00 + FREE US SHIPPING
Comes standard with one 3/8" x 3/8" adapter, one 3/8" x 1/2" adapter, and one 1/4" bit adapter
$65.00 + S&H (calculated on next page)
Comes standard with one 3/8" x 3/8" adapter and one 1/4" bit adapter
$27.50 + S&H (calculated on next page)
For quantities larger than five please contact us
NEW ADDITION! Standard: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and Metric: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm. 3/8" drive sockets to be used with the Tite-Reach 3/8" Extension Wrenches. Magnetic insert keeps bolt or nut firmly in place. Rust resistant chrome finish. Sturdy storage case. Adapters not included.
$59.00 + S&H (calculated on next page)
OUR NEWEST ADDITION! ALIGN | HOLD | COMPRESS in the tightest of places.
$17.50 + S&H (calculated on next page)
$5.00 + S&H (calculated on next page)
$5.00 + S&H (calculated on next page)
$5.00 + S&H (calculated on next page)
$5.00 + S&H (calculated on next page)
Tite-Reach Gear - Tshirt S-XXL
$15.00 + S&H (calculated on next page)
Tite-Reach Gear - 6" x 1.72" Toolbox Decal
$5.00 + S&H (calculated on next page)
Drop it into your 3/8" PRO or DIY and use it with any 1/4" bit. Now comes standard with any 3/8" PRO or 3/8" DIY orders
Use your 3/8" PRO with your 1/2" standard or impact sockets
Lost one of your standard adapters? No problem.
Model: | 1/2"PRO | 3/8"PRO | 1/4"PRO | 3/8"DIY |
---|---|---|---|---|
Reach | 14" | 10” | 10” | 8" |
Material | Die Cast Aluminum | Die Cast Aluminum | Die Cast Aluminum | Ultrasonically welded ABS plastic |
Bushings | Roller bearing | Low friction UHMW bushings | Low friction UHMW bushings | Low friction UHMW bushings |
Torque Rating | 225ft/lbs of torque | 125ft/lbs of torque | 40ft/lbs of torque | 30ft/lbs of torque |
Impact Rating | 1200ft/lbs of torque | 400ft/lbs of torque | Not Rated | Not Rated |
Warranty | Limited Lifetime | Limited Lifetime | Limited Lifetime | Single time replacement |
Measurements | L-16.5" | W-2.3" | H-1.2" | L-11.75” | W-1.8” | H-1” | L-11" | W-1.25" | H-0.75" | L-9.5" | W-1.5" | H-0.75" |
Included Adapters | 3/8" x 3/8" | 3/8" x 3/8" | 3/8" x 1/2" | 1/4" bit adapter | 1/4" x 1/4" | 3/8" x 3/8" | 1/4" bit adapter |
There is an 8% loss using the Tite-Reach with a torque wrench. NOT sold in stores. Drivers & NOT included. Tite-Reach is designed in the USA and manufactured in China.
We designed this wrench to last. Tested by heavy equipment mechanics and farmers over the past 2 years the 1/2" drive exceeded our expectations. Rated on an impact for up to 1,200ft/lbs and 225ft/lbs of direct torque because of it's die cast aluminum frame, #40 chain, and roller bearings instead of bushings. This wrench comes with 14" of reach instead of 10" increasing your chance of extending far enough out to put on an impact wrench. The 1/2" even comes with a 3/8" adapter so you can easily switch between 1/2" and 3/8" sockets.
Our 3/8” professional wrench is where the concept started. The 3/8” pro is specially designed to handle the rigors of everyday use on the farm and in the shop. Designed to be used with your own sockets and socket wrenches all of our wrenches have the versatility to work from either side. With 10” inches of reach our 3/8” pro will extend your reach away from what you are working on saving you time and saving your knuckles. If you would like to get the job done quicker you can also couple our wrench with your impact driver saving you more time and making that awkward nut or bolt easy work on. This wrench is also coupled with a lifetime warranty to ensure your satisfaction.
The strength of our ¼” wrench is its slim design. This tool allows you to get into places your 3/8” wrench won’t fit. Our die cast aluminum housing allows you to match the 10 inches of reach the 3/8” gives you and fits into smaller spaces. The aero and body work industries really enjoy the ¼” wrench for that fact alone. Like the 3/8” wrench the ¼” version also has a lifetime warranty. Our ¼” version is also lightweight making it easy to work with and maneuver.
Our 3/8” DIY version was made to be the “every man’s tool” An affordable enough for every guy to have in their toolbox. Outfitted with the same low friction UHMW low friction bushings and chrome vanadium gears as our DIY version has some of the same high-quality parts our professional models use. Our DIY is a great tool for around the house and the garage giving you an 8” extension for your “tite” places.
317 7th Street NW
Orange City, IA, 51041
mike@tite-reach.com
866.721.9399